TuningBox® manufactures different types of units adapted to different models of vehicles. Other than the software, the main differentiating factor between units are the connectors.
Here are the different models
TuningBox® DH serie
The 2 TuningBox® connectors attach simply onto the original pump connectors. The little black wire needs to be plugged with a scotch lock on the airflow meter connector. There are no adjustments to be made.
Car types: Golf, Seat TDI 90-110 HP, BMW TDS, …
TuningBox® CR serie
The 2 TuningBox® connectors attach to the common rail injection pressure sensor.
Car types: CDI, JTD, HDI, TDI, CRDI, TDCI, CDTI, etc.
Depending on the models, connects to 1, 2 or 3 sensors (injection pressure, turbo pressure and cam shaft), this being the reason for different wiring models.
TuningBox® CR / HDI /DCI, D4D (exclusivity)
The 4 TuningBox® connectors attach to the injector connectors and 2 other connectors attach to the battery.
Car types: HDI, DCI, D4D.
TuningBox® VP serie
The 2 TuningBox® connectors simply attach to the pump connectors.
Car types: OPEL DTI, AUDI V6 TDI, BMW 320D, …
TuningBox® IP serie
Injection pump system, the 2 TuningBox® connectors attach to the pump connectors and 2 other connectors attach to the battery.
Car types: VAG 115-130-150 HP
TuningBox® for trucks
The TuningBox® connects directly onto the injection control box and the battery.
TuningBox® for tractors
The TuningBox® connects directly onto the injector connection points and the battery.